Standard Wiring Essentials and Conductivity of Insulated Terminals

The wiring essentials of the insulated terminal socket specification, if there are 3 wiring exposed holes on the three-hole plug, which are L-live wire, N-zero wire, and E-ground wire, remove the insulation covering about 2 cm at the end of the wire. , Bare the copper wire ends, twist the two wire ends into the holes, and tighten the screws. To be more calm, you can immediately use the electric pen to determine which one is the live wire. The same is usually the left and the right. The left is connected to the live wire, and the right is connected. The side is connected to the neutral wire, and the ground wire is connected to E.

The material of the insulated terminal affects the insulation performance and conductivity of the insulated terminal. Each insulated terminal affects the success of the project, and the failure of all insulated terminals will lead to the failure of the entire system engineering. With the continuous improvement of electronic technology, insulated terminals The structural characteristics and development technology of its own have also been innovated from generation to generation, and the insulation terminal industry in my country is also welcoming a transformation in the process of catching up with the development of similar foreign products. Technical substitute advantages, and immediately imitating the technological research and development results of large-scale insulation terminal manufacturers , It saves the funds for product research and development. In the industrial control system industry, insulated terminals have long become the most critical accessory products. As a kind of connector, insulated terminals have quickly become the favorite of the industrial control system industry with their good connection performance. Insulation Terminals are now widely used in various industries, including data signal insulated terminals, power insulated terminals, connection insulated terminals, etc., which are the connection terminals in the circuit.

Insulated terminals are a traditional industry. The product method can be derived from various specifications due to the individual needs of different industry functions and environments. In addition to safety standards, there are only interchangeable specifications that have been formed for a long time in the industry, and there is no so-called standard product. Therefore, satisfying the choice of more diversified products is a very important issue facing insulated terminals. The industrial control system industry with highly individualized needs is also the most successful market at this stage.
If you are interested in our insulated terminals, you can contact us to learn about our products.